What To Do If There Is No Hot Water

Request Service

This great article down below about How to Troubleshoot and Repair an Electric Water Heater is truly compelling. Give it a go and make your own personal assumptions.



Many contemporary residences use an electric hot water heater for their heating system, because of its convenience as well as ease of use. Nevertheless, just like any other electric devices, issues might occur with its use, all of a sudden. It can be truly irritating to get up to a cold shower rather than a hot one or having your bathroom with water that isn't hot adequate or even also hot. Whatever the instance might be, hot water heater troubles can be quite aggravating. Fortunately, we've made a checklist of possible options to your hot water heater issues. There are a variety of variables that could trigger most of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety and security. Whatever the problem is, getting it taken care of need to not pose excessive of a problem if you comply with these actions:

Call A Professional:


If after replacing all defective components and also resetting your temperature, the water heater still isn't working, you might require to contact an expert plumber for an expert point of view. The trouble with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the situation might be, a specialist plumber would certainly aid solve the problem.

Check Your Power Supply:


As fundamental as this might appear, it is really essential. Without ample power, your hot water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just transform it on and off once again. Change any type of busted or damaged fuse. Check the device with power after these adjustments to see if it's currently functioning.

Inspect Your Thermostat:


If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This should help warm the water. Transform the breaker back on as well as check if the problem has been resolved.

Examine the Burner in the Hot Water Heater:


If it's not a power issue, then try checking out your burner if it is still functioning. Check each of your burner to make sure the problem isn't with any one of them. If any one of them is malfunctioning, replace that part and then examine whether the warm water is back on.

Final thought


Water heater troubles are not constantly major. A lot of them are due to small problems like a blown fuse or worn-out heating element. Changing the defective parts ought to do the trick. Nonetheless, if you are still incapable to resolve the problem, give a call to your local plumber to find to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


Hot Water Heater Repair

As an avid person who reads on What Would Cause My Electric Water Heater to Stop Working?, I thought sharing that excerpt was important. Enjoyed reading our write up? Please share it. Let another person locate it. Thanks for your time. Come back soon.




At This Website

Leave a Reply

Your email address will not be published. Required fields are marked *